|
GENTAUR
Tel: +32 16 58 90 45
Fax: + 32 16 50 90 45
info@genprice.com
Av. de l'Armée 68
• B-1040 BRUSSELS • BELGIUM
GENTAUR FRANCE
Tel: 01 43 25 01 50
9, Rue Lagrange
• 75005 PARIS • FRANCE
| |
Modular Incubator Chamber
|
Modular Incubator
Chamber |
A compact and versatile Incubator that can be
used for all types of Tissue Culture Work.
Applications:
 |
In Vitro Fertilization |
|
Hypoxia/Hyperoxia |
|
Stem Cell Propagation/Differentiation |
|
Cryopreservation |
|
Transgenics |
|
[35 S]-Met/Cys Containment |
|
Transfections |
|
Promotes Neutral Cell Growth |
|
Organ Culture |
|
Cloning |
|
Viruses |
Specifications:
Tissue Cultureware Capacity:
| 35mm Petri Dish |
84 |
| 60mm Petri Dish |
27 |
| 100mm Petri Dish |
12 |
| 96-Well Microculture Plate |
9 |
| 25cm2 Tissue Culture Flasks |
18 |
Dimensions:
Outside Dimensions Diameter: 31cm Height: 11cm
Inside diameter of Trays 26.7cm
Clearance between Trays 2.3cm
The Hot Box System eliminates the hazard of
contamination of personnel and equipment by radioactive
gases. It isolates labeling experiments and allows you to regain
full use of your CO2 incubator. Conduct experiments safely in
the Hot Box System.
With millions of contaminating counts generated during
typical labeling experiments, incubators must be
decontaminated after every use. You can now conduct safe
[35S] labeling experiments at a fraction of present cost!
The Hot Box System is compact and easy to use. Just place
labeling experiment and a Static Hot Filter and flusk unit with
desired gas mixture. Seal unit, remove Exhaust Hot Filter, and
Flow Meter and place the Hot Box in a controlled temperature
environment. To remove the labeled cells,
reattach Exhaust Hot Filter and Flow Meter, and purge again.
Dispose of both filters. It's that simple!
| Modular
Incubator Chamber |
A compact and versatile Incubator that can be used for all
types of Tissue Culture Work.
| Catalog No. |
Description |
| 21-MIC101 / 642 Euro |
Modular Incubator Chamber
One Modular Incubator Chamber consists of the following parts: Lid,
base, 3 trays, stainless
steel clamp, O-ring, 2 tubing clamps and tygon tubing. |
| 21-HMIC3S/ 612 Euro |
Conversion Kit with Single Flow Meter
Kit includes: Single Flow Meter(1), Hot Filters (1 set=5 exhaust and 5
static filter),
Chimney(1), Air Filter(2), Static Filter Post(1), and O-Ring(1) |
| 21-HMIC3/ 635 Euro |
Conversion Kit with Dual Flow Meter
Kit includes: Dual Flow Meter(1), Hot Filters (1 set=5 exhaust and 5
static
filter), Chimney(1), Air Filter(2), Static Filter Post(1), and O-Ring(1) |
| 21-SFM3001/ 385 Euro |
Single Flow Meter for pre-mixed gas |
| 21-DFM3002/ 442 Euro |
Dual Flow Meter for mixing gases |
| 21-102/ 285 Euro |
Lid, Polycarbonate |
| 21-103/ 275 Euro |
Base, Polycarboante |
| 21-104/ 225 Euro |
Tray, Polycarbonate |
| 21-105/ 212 Euro |
Stainless Steel Ring Clmap |
| 21-106/ 112 Euro |
O-Ring |
| 21-107/ 112Euro |
Tubing Clamp(12 clamps with tubing) |
| 21-HBS2001S/ 915 Euro |
Hot Box System with Single Flow Meter
System includes: MIC-101(1)00, Hot Filters (1 exhaust and 1 static
filter), Hot Chimney(1),
Single Flow Meter(1), Air Filter(2), and Static Filter Post(1)
Note: Hot Filters must be used in conjuction with a flow meter. Failure
to do so may cause
back pressure to increase resulting in failur of system. |
| 21-HBS2001D/ 985 Euro |
Hot Box System with Dual Flow Meter
System includes: MIC-101(1)00, Hot Filters (1 exhaust and 1 static
filter), Hot Chimney(1),
Dual Flow Meter(1), Air Filter(2), and Static Filter Post(1)
Note: Hot Filters must be used in conjuction with a flow meter. Failure
to do so may cause
back pressure to increase resulting in failur of system. |
| 21-HFS2020/ 175 Euro |
1 Set of 5 Exhaust and 5 Static Hot Filters |
| 21-HCS2030/ 112Euro |
1 Set of 5
Hot Chimneys |
| 21-HFS2021/ 165 Euro |
1 Set of 6 Air Filters |
|
