|
GENTAUR
Tel: +32 16 58 90 45
Fax: + 32 16 50 90 45
info@genprice.com
Av. de l'Armée 68
• B-1040 BRUSSELS • BELGIUM
GENTAUR FRANCE
Tel: 01 43 25 01 50
9, Rue Lagrange
• 75005 PARIS • FRANCE
| |
Electrophoresis 1
1.
Agarose Gel Electrophoresis
2. Polyacrylamide Gel Electrophoresis
(PAGE)
3. Precast Gel
4. 2-D Electrophoresis
5. Power Supply
6. Blotting
7. Gel Staining
8. Gel Dryer
9. Gel Documentation System
1. Agarose Gel Electrophoresis
| Submerged Agarose
Electrophoresis |
AE-6111 |
 |
| Submerged, horizontal agarose gel
electrophoresis is one of the primary tools for molecular biology, as an
easy, economic and efficient technique for separation of nucleic acids
as well as analysis of PCR-amplified fragments. UV transparent gel tray
for ease of gel viewing. Comb teeth designed to provide sharp band.
Buffer recirculation ports to afford recirculation or cooling of buffer
to avoid interference in separation. 12 x 16cm gel with 26 or 13 wells
per comb. |
| Submerged Agarose
Electrophoresis |
AE-6125 / 6133
|
 |
| Submerged, horizontal agarose gel
electrophoresis is one of the primary tools for molecular biology, as an
easy, economic and efficient technique for separation of nucleic acids
as well as analysis of PCR-amplified fragments. UV transparent gel tray
for ease of gel viewing. Comb teeth designed to provide sharp band.
Buffer recirculation ports to afford recirculation or cooling of buffer
to avoid interference in separation. 15 x 20 or 25cm gel with 32 or 16
wells per comb/20 x 15 or 20cm with 42 or 21 wells per comb. |
| Submerged Agarose
Electrophoresis |
AE-6135 |
 |
| Submerged, horizontal agarose gel
electrophoresis is one of the primary tools for molecular biology, as an
easy, economic and efficient technique for separation of nucleic acids
as well as analysis of PCR-amplified fragments. UV transparent gel tray
for ease of gel viewing. Comb teeth designed to provide sharp band.
Buffer recirculation ports to afford recirculation or cooling of buffer
to avoid interference in separation. 25 x 12cm gel with 54 or 27 wells
per comb. |
| Buffer Circulator
|
AE-6380 |
 |
| The mini-pump for
buffer solution circulation. Distortion of the electrophoresis band
pattern by pH deviation of buffer solution or temperature variation is
prevented by circulation of buffer solution. |
Go to page top
2. Polyacrylamide Gel Electrophoresis (PAGE)
|
Slab Electrophoresis Chamber |
AE-6200 |
 |
| High resolution separation with simple
operation. One entire surface of gel sandwich is in contact with buffer
for rapid heat dissipation and uniform gel temperature. It affords
relatively fast, high resolution separation, while minimizing the
possibility of smiling effect, distortion or diffusion of bands, without
the requirement for cooling. A gel is held simply with unique pressure
platen, without the use of screws or clamps, while eliminating the
possibility of slippage or leakage. This chamber is transparent, has no
obstructions to visibility, and provides ease of access to sample wells
and observation of separation. |
| Dual Slab
Chamber/Dual Mini Slab Chamber |
AE-6290/6510 |
 |
| Temperature-controlled PAGE of proteins
or nucleic acids. Consists of slab gel cast, chamber and TempCon (heat
exchanger). One or two gels are run. Both two surfaces of each gel
sandwich are in contact with buffer for the most effective temperature
control of gels. The chamber has buffer inlet and outlet ports to
connect with TempCon. TempCon has a circulation pump to recirculate
buffer. TempCon also are connected with a thermostatic circulator. Heat
exchange between buffer and circulation fluid is made within TempCon.
This system affords 5 to 60°C control of buffer. Two types of gel sizes:
138mm x 130mm(AE-6290) and 90mm x 80mm(AE-6510). |
| mini PAGE
Chamber |
AE-6530 |
 |
| High resolution separation of protein and
nucleic acid in 2 gels of compact 90 x 80 x 1mm format. Simplified
routines for ensured reliable operation. Minimized smiling with
efficient heat dissipation. Sideways current leak eliminated to avoid
outward diffusion of bands. Leak of gel solution and leak of buffer
eliminated. Unique design for easy but ensured setting of gels.
|
| mini PAGE
(pageRun) |
AE-6531 |
 |
| Powered mini PAGE system. No need for a
separate power supply unit any more. You only have to connect it to an
electric source and run. High resolution separation of protein and
nucleic acid in 2 gels of compact 90 x 80 x 1mm format. Simplified
routines for ensured reliable operation. Minimized smiling with
efficient heat dissipation. Sideways current leak eliminated to avoid
outward diffusion of bands. Leak of gel solution and leak of buffer
eliminated. Unique design for easy but ensured setting of gels. Offered
in a convenient package, ready to cast and run 2 gels of 1 mm thickness
and 12 wells. |
| Compact PAGE |
AE-7300 |
 |
| Compact type PAGE provided with power
supply. Gel size(60mm x 60mm) and apparatus body are very compact.
Buffer volume required is only 90mL, as a result, running cost can be
saved. Electrophoresis time is only 30 minutes. In spite of compact size
and low price, it establishes the same level of resolution separation as
the former mini-gel electrophoresis system. |
| miniQuencer |
AE-6141 |
 |
| 18 x 20cm, moderate gel
size provides necessary and sufficient migration distances to reconcile
high resolution separation with high operation efficiency over larger
and smaller gels. Gel sandwich is backed by built-in aluminum heat sink,
which is backed by water jacket, built-in and removable. Circulating
thermostatic water through the water jacket provides temperature
regulation of gel, that is essential for SSCP or differential display of
nucleic acids, as well as cooling of gel. |
3. Precast Gel
| PAGEL Precast Mini
Gels AE-6000 series |
 |
| Precast polyacrylamide gels with
performed wells and a stacking gel, ready to run in the Atto mini PAGE
systems. The high quality gels with quality-consistent gel formation
ensure high resolution separation and high gel-to-gel reproducibility.
The glass cassettes provide faster heat dissipation and more uniform
temperature than plastic cassettes. Uniform, single concentration gels
and linear gradient gels are offered. They have a life of about 6 months
when stored at about 2 to 8C. |
| Tris-Glycine
e-PAGEL Precast Gels |
 |
| Precast polyacrylamide gels with
performed wells, specifically designed for use with Atto mini PAGE
systems. The ready-to-run gels simplify and speed protein and nucleic
acid electrophoresis procedures. The gels afford either SDS-PAGE in
Tris-Glycine buffer system. Single concentration and gradient gels with
14 or 18 sample wells are offered. The gels keep for about 6 months
under 2 to 10°C storage. |
| c-PAGEL Precast
Gels |
 |
| Precast polyacrylamide gels with
performed wells, specifically designed forAE-7300 Compact PAGE. Gel size
is compact such as 60(W)mm x 60mm(H). Even if compact gel size, it
realize high resolution separation and high reproducibility. |
Go to page top
4. 2-D Electrophoresis
| mini/compact Disk
Electrophoresis |
AE-6541 discRun |
 |
| Tube gel electrophoresis system designed
for PAGE or SDS-PAGE and isoelectric focusing of protein and nucleic
acid under constant temparature conditions. It accommodates up to 8
glass tubes of 7.5 mm outer diameter and 75 to 100 mm length. It affords
the first dimension isoelectric focusing for 2-D electrophoresis, as
well as native or denaturing PAGE. Offered in a convenient kit.
|
Go to page top
5. Power Supply
| powerStation
1000VC/1000XP
|
AE-8450 / 8750
|
  |
| Electrophoresis use
power supply. Up to 1000V constant voltage, up to 500mA constant
current, up to 1000-minute timed run and automatic crossover (in
addition, AE-8750 offers 200 Wattage constant output), 10 sets of
voltage-current-time conditions, programmed, stored and easy accessed.
Safety-protective automatic output shutdown to prevent operations from
electric hazard. 2.5Kg light compact design. Easy to operate control
panel with large and bright 4-digit LED display to read either set or
actual conditions. Convenient output pause function for temporary
interruption or resetting. Minimized electrical noise for other lab
instruments. Power failure protection. |
| myPower 300/500
|
AE-8130 / 8150
|
  |
| 7cm wide, 14.8cm high
and 21cm deep small compact and lightweight electrophoresis use power
supply. AE-8130 myPower 300, providing 300V and 400mA constant output
with automatic crossover, suits horizontal agarose electrophoresis,
semi-dry blotting and PAGE with up to 50VA output. AE-8150 myPower 500,
providing 500V and 200mA constant output with automatic crossover, suits
PAGE, horizontal agarose electrophoresis, mini semi-dry blotting with up
to 25VA output. Up to 999 minutes timed output with alarm buzzer.
User-friendly simple and easy operation. 2-line, 3-digit meter allows
reading either set or actual voltage, current and time, during output.
Convenient, dual power outlet in parallel. Safety shutdown against short
and open circuit. |
| constaPower 3000
|
AE-8800 |
 |
| Power supply for
electrophoresis in which the output of up to 3000V voltage is possible .
Up to 3000V constant voltage, up to 300mA constant current, up to 300W
constant output, up to 99999-minute timed run and automatic crossover.
Safety design. As it offers wide range of voltage, current and wattage,
it suits disk, mini-slab/slab PAGE, submerged agarose electrophoresis,
SSCP, IEF etc. |
CrossPower
150
(NOT available for 220-230V) |
AE-8300 |
 |
| Power
supply equipped with "Crossover ability" and it has the large current
specification in which the current output up to maximum 4A is possible.
Output ranges are up to 150V and up to 2A, or up to 75V and up to 4A .
Automatic crossover function to lessen heat interference to separation,
damage to gel and danger to operator. Reliable output stabilized against
variations in voltage, load and temperature. It suits for the cases
needed large current with relatively low voltage, such as submerged
agarose electrophoresis, semi-dry blotting in large gel format and Tank
blotting. |
Go to page top
6. Blotting
| HorizBlot |
AE- 6677/6678
|
 |
Fast, efficient semi-dry blotting of
protein and nucleic acids. Height-adjustable, stainless steel cathode,
and contamination-free, platinum-plated titanium anode. Simultaneous
blotting up to 6 gels are possible. Perfect contact of gel and membrane.
High blotting efficiency is ensured by uniform electrical field realized
by horizontal plate electrodes.
Size of electrode: 15 x 15cm (AE-6677), 20 x 20cm(AE-6678) |
| CompactBlot |
AE-7500 |
 |
| Compact semi-dry blotting apparatus
provided with power supply. Stainless steel cathode, and
contamination-free, platinum-plated titanium anode. Small size, low
cost, easy and high operability. Blotting performance is the same as
that of conventional ones. |
Go to page top
7. Staining and Destaining
|
Maultipurpose Automatic Gel Stainer |
AE-6630 |
 |
| Designed to minimize
operator's load as well as to provide higher reproducibility with
technical consistency, by automating staining routines. Operation
programmable for staining with reverse stain or silver stain, for
staining and destaining with dye stain or ethidium bromide, for staining
of blot membranes, and various staining techniques. Up to 20 files to
program and store your staining protocols. Up to 48 steps per file to
program a series of procedures. |
| EzStain
Silver (silver stain kit) |
AE-1360 |
 |
| High sensitivity band
detection reagent kit after gel electrophoresis of protein and nucleic
acid. Easy handling and the dyeing processing time is 50 - 55 minutes.
The reagent includes pure water and four kinds of liquids. One dyeing
reagent kit can dye about 50 mini-gels. |
|
EzStain Reverse
(reverse stain kit) |
AE-1310 |
 |
| High sensitivity and
high speed band detection reagent kit after gel electrophoresis of
protein. sensitivity of coloring is 10 times higher than conventional
ones. Detection time is about 20 - 25 minutes. A reagent includes pure
water and three kinds of liquids. One dyeing reagent kit can dye about
50 mini-gels. |
Go to page top
8. Gel Dryer
| RapiDry |
AE-3750 |
 |
| Dual-Heater Gel Dryer.
It has a 45 x 38cm wide gel drying area, which accommodates 1 or 2
sequencing gels, up to 6 PAGE gels, or up to 12 mini PAGE gels to be
dried simultaneously. Dual-heater (one in the lid and one in the base)
affords rapid drying and ensures even heat distribution. It provides 40
to 80°C temperature adjustment. 3-speed initial-temperature-rise
selectable for delicate gels. Up to 540 minutes timer. Simple and easy
operation. |
| RapiDry mini |
AE-3711 |
 |
| Gel drying area : 20 x
19cm. Dual-heater (one in the lid and one in the base) affords rapid
drying and ensures even heat distribution. Compact, easy-to-operate
design. Fluoroplastic-coated heat panel. Full protection against
overheat. 40 to 80°C temperature adjustment. Up to 180 minutes timer.
|
| GELMASTER |
Model-1426 |
 |
| The vacuum pump for gel
dryer. It's connected directly to a gel dryer with a connecting tube,
and absorbs. It is not necessary to connect other traps such as a
cooling trap. Easy handling, maintenance and space-saving because of
compact design. |
Go to page top
9. Gel Documentation System
| Printgraph |
AE-6932 |
 |
| Gel documentation
system consisting of a high sensitivity monochrome CCD camera, a various
functions camera controller and a shading cabinet. Real-time photography
of a sample is possible. There are two types of camera controllers, the
one has picture saving function to Compact Flash Disks, the other dose
not have. The shading cabinet is chosen from four types (FX type: good
at gel extraction and easy handling, CX type: provided with light
inside, GX type: small and low price, stand type: used in darkroom )
according to the purpose of use, the kind of sample, and the size of gel
and cabinet. |
Densitograph
(#English version under development) |
AE-6940V |
 |
System which photos and
saves electrophoresis gel patterns, and performs quantification from a
stained image using picture analysis software. It's constituted of
"Printgraph", a personal computer (Windows), and analysis software.
 | Molecule-weight-presumption from the position
information of molecular weight markers by "Zone-densitometry"
method is possible.
|
| Concentration quantification from the acquired
accumulated value by measuring the band is possible.
|
| Dot-blot patterns arranged regularly can be
measured at a time by the method of "Spot measurement".
|
|
Gentaur - Atto
|
